Altos User's Guide
Table Of Contents
- Notices
- Important safety instructions
- 1 System tour
- 2 System setup
- 3 System upgrade
- 4 BIOS setup
- 5 Troubleshooting
- Appendix A: Acer Altos R910 rack installation guide
- Appendix B: Memory configuration options
- Appendix C: Integrated SCSI hardware RAID configuration
- Index
63
2 If necessary, remove the CPU air baffle. Perform instructions
described in “Removing the CPU air baffle” on page 38.
3 Locate the CPU you want to remove.
4 Loosen the four screws on the heat sink.
5 Lift the heat sink to remove it.
6 Place the heat sink upside down on a flat surface.
Note: Wipe off the thermal grease from both the heat sink and
processor using an alcohol pad.
7 Pull the CPU socket retainer lever to the fully open, upright
position.