Altos User's Guide
Table Of Contents
- Notices
- Important safety instructions
- 1 System tour
- 2 System setup
- 3 System upgrade
- 4 BIOS setup
- 5 Troubleshooting
- Appendix A: Acer Altos R910 rack installation guide
- Appendix B: Memory configuration options
- Appendix C: Integrated SCSI hardware RAID configuration
- Index
3 System upgrade
78
3 Insert the standoff into the hole in the ARMC/3 or BMC module
connector (A). The standoff installs on the bottom side of the
module.
4 Attach the module to the connector and snap the standoff into
the matching hole on the mainboard (B).
5 Observe the post-installation instructions described on page 34.