Altos User's Guide
Table Of Contents
- Notices
- Important safety instructions
- 1 System tour
- 2 System setup
- 3 System upgrade
- 4 BIOS setup
- 5 Troubleshooting
- Appendix A: Acer Altos R910 rack installation guide
- Appendix B: Memory configuration options
- Appendix C: Integrated SCSI hardware RAID configuration
- Index
3 System upgrade
84
4 Disconnect the battery cable from the mainboard (A) and detach
it from its chassis holder (B).
5 Remove the battery holder from the chassis.
6 Open the battery holder by pinching the top and bottom covers of
the holder (A), then detach the cable inside the battery pack (B).
7 Remove the RAID BBU from the chassis.
8 Replace the memory boards and memory air baffles.
9 Observe the post-installation instructions described on page 34.