Manual

5 System troubleshooting

116

Resetting the system

Before going through in-depth troubleshooting, attempt first to reset

the system using one of the methods below.

Initial system startup problems

Problems that occur at initial system startup are usually caused by an

incorrect installation or configuration. Hardware failure is a less

frequent cause. If the problem you are experiencing is with a specific

software application, see "There is problem with the application

software" on page 122.

To do this Press

Soft boot reset to clear the system memory

and reload the operating system.

Cold boot reset. Turn the system power off

and then on. This clears system memory,

restarts POST, reloads the OS and halts power

to all peripherals.

Power button