User Manual

53
English
English
Memory upgrade
Your computer features two memory slots that accept DT DDR333/400
DIMMs (Dual Inline Memory Modules). The memory slots support 256-
MB ,512-MB and 1GB DDR SDRAM.
The memory slots are easily accessible, allowing you to upgrade your
computer's memory.
To install memory:
* Refer to “Opening The Case” on page 49 and locate the DDR DIMM
socket on the main board.
a) Align the DDR DIMM with the socket and press the DDR DIMM into
the socket.
b) Press the holding clips on both sides of the DDR DIMM socket inward
to lock the DDR DIMM.
Your computer automatically detects the amount of memory installed.
Run the BIOS utility to view the new value for total system memory
and make a note of it.