User Guide
Copyright © 2012. All Rights Reserved. Acer Predator G Series User Guide Original Issue: 03/2012 Acer Predator G Series Desktop Computer Model number: __________________________________ Serial number: ___________________________________ Purchase date: ___________________________________ Place of purchase: ________________________________ Visit http://registration.acer.com and discover the benefits of being an Acer customer. Remark: All images are for reference purposes only.
iii Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Warnings • • • • • Do not use this product near water. Do not place this product on an unstable cart, stand or table.
iv • This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.
v CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Telephone line safety • • Disconnect all telephone lines from the equipment when not in use and/or before servicing. To avoid the remote risk of electric shock from lightning, do not connect the telephone line to this equipment during lightning or thunderstorms.
vi Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders.
vii • • • • Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity.
viii
Safety instructions Disposal instructions Tips and information for comfortable use iii iii v v 1 First things first 1 Package contents Accessing the User Guide 2 2 2 System tour 3 External structure 4 Front panel Information on USB 3.
x Which devices are compatible? Playing to another device 15 15 4 Using your computer 17 Using the optical drive 18 Taking care of your optical discs Connecting options Audio devices USB devices 19 19 19 19 5 Upgrading your computer 21 Installation precautions 22 ESD precautions Preinstallation instructions Post-installation instructions Opening your computer Removing and installing a hard drive Upgrading the system memory System memory interface System memory configuration guidelines 22 22
1 First things first
English 2 1 First things first Package contents Before you unpack your computer, make sure that you have enough space to set up your computer. Carefully unpack the carton and remove the contents.
2 System tour
English 4 External structure Front panel 2 System tour
5 Icon Component 1 USB 2.0/3.0 ports 2 Optical disc drives 3 Media card slots 4 Easy-swap hard disk cartridge 5 Drive bay door 6 Optical disk drive eject buttons 7 Microphone/line-in jack 8 Headphone/line-out jack Information on USB 3.0 • • • Compatible with USB 3.0 and earlier devices. For optimal performance, use USB 3.0-certified devices. Defined by the USB 3.0 specification (SuperSpeed USB).
English 6 2 System tour Using the memory card reader Your computer supports multi-media card slots. These slots are useful for transferring data to and from memory cards to your computer. Memory cards are used in a variety of digital devices such as digital camera, digital camcorders, handheld game consoles, and mobile phones. To insert a memory card: 1 Hold the card label-side up with the card facing the computer. 2 Slide the card into the slot until it is seated.
7 Icon Component Power supply PS/2 mouse port System fan Network port Headphone/line-out/front speaker jack Audio-in/line-in jack Microphone/line-in jack USB ports PS/2 keyboard port Power connector Environment • Temperature: • Operating: 5°C to 35°C • Non-operating: -20°C to 65°C • Humidity (non-condensing): • Operating: 20% to 80% • Non-operating: 20% to 80% English Rear panel
English 8 2 System tour
3 Setting up your computer
English 10 3 Setting up your computer Arranging a comfortable work area Working safely and comfortably begins with the arrangement of your work space and the proper use of equipment. For this reason, it is very important to take time and think about how you are going to arrange your work area. Refer to the diagram on the following page as you set up your system. Here are some points to consider: Adjusting your chair Having the right kind of chair does not necessarily mean you'll be properly supported.
11 • Do not put your computer near any equipment that might cause electromagnetic or radio frequency interference, such as radio transmitters, televisions, copy machines or heating and air-conditioning equipment. • Avoid dusty areas and extremes of temperature and humidity. • You may place your computer beside your desk or under your table, as long as it does not block the space you need for working and moving.
English 12 3 Setting up your computer Connecting the computer Setting up your computer is easy. For the most part, you only have four things to connect: the mouse, the keyboard, the monitor, and the power cable. Note: The peripherals shown in the connections below are for your reference only. Actual device models may vary in select countries.
13 Caution: Before you proceed, check the voltage range in your area. Make sure that it matches your computer's voltage setting. If they don't match, change your computer's voltage setting according to your area's voltage range. 1 Plug the power cable into the power cable socket located on the rear panel of your computer. 2 Plug the other end of the power cable into a power outlet.
English 14 Acer clear.fi (only for certain models) With Acer clear.fi, you can enjoy videos, photos and music. Stream media from, or to, other devices with Acer clear.fi installed. Note: All devices must be connected to the same network. To watch videos or listen to music open clear.fi Media, to browse photos open clear.fi Photo. Important: When you first open a clear.fi application, Windows Firewall will ask for permission to allow clear.fi to access the network. Select Allow Access in each window.
15 Which devices are compatible? Certified Acer devices with clear.fi or DLNA software can be used with the clear.fi software. These include DLNA-compliant PCs, smartphones, and NAS (Network Attached Storage) devices. Playing to another device If you want to play the media on another device, you need to do the following: 1 In the bottom right corner, select Play to. 2 Select the remote device that will be used to play the file.
English 16
4 Using your computer
English 18 4 Using your computer Using the optical drive Your computer may come with a Blu-ray reader + SuperMulti burner. This drive is located on the front panel of your computer. The BD and HD drive allows you to play CD-ROMs, CD-I discs, and video CDs, DVD-RAM/-RW, DVD-ROMs, DVD+R/R discs, but play BD discs as well. CDs, DVDs, BDs are also compact, lightweight and easy to carry around. However, they are more delicate and must be handled with extra care.
19 • Keep your disc in its case when not in use to avoid scratches or other damage. Any kind of dirt or damage can affect the data on the disc, impair the disc lens reader on the optical drive, or stop the computer from successfully reading the disc. • When handling discs, always hold them by the edges to avoid smudges or fingerprints. • When cleaning discs, use a clean, dust-free cloth and wipe in a straight line from the center to the edge. Do not wipe in a circular motion.
English 20 4 Using your computer To connect a USB device, simply plug the device cable into any of the USB ports located on the front and rear panels of your computer. Note: Some USB devices have a built-in USB port which permits you to connect more USB devices.
5 Upgrading your computer
English 22 5 Upgrading your computer Installation precautions Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post-installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components.
23 Observe the following after installing a computer component: 1 See to it that the components are installed according to the step-by-step instructions in their respective sections. 2 Replace any expansion boards or peripherals that you removed earlier. 3 Replace the side panel. 4 Replace the bezel door. 5 Connect the necessary cables. 6 Turn on your computer.
English 24 5 Upgrading your computer Removing and installing a hard drive The computer supports up to two easy-swap hard disk drives. Each hard disk is mounted in a carrier that holds a standard 3.5-inch Serial ATA hard drive and connects to a SATA interface on the disk cage backplane. Easy-swap technology shortens system downtime for changing the hard disk or performing an upgrade. Note: Do not attach or detach the hard drive while the system is on. It may cause damage to the device or lose data.
25 1 Open the drive bay door. 2 Press the hard disk carrier latch and pull the lever. 3 Slide the hard disk carrier from the chassis. 4 Insert the right side of the new drive into the carrier, aligning the pins with the hard disk mounting holes.
English 26 5 Upgrading your computer 5 Gently open the tab at the front of the carrier; insert the pin into the front mounting hole. Bend the rear part of the carrier open; insert the pin into the rear mounting hole. 6 With the lever still extended, slide the carrier all the way into the drive bay, and close the cover.
27 This section explains the procedures for removing and installing a memory module. System memory interface The four 240-pin sockets on the mainboard support Double Data Rate 3 (DDR3) Synchronous Dynamic Random Access Memory (SDRAM)-type DIMMs. You may install 1 GB or 2 GB DIMMs for a maximum memory capacity of 8 GB. System memory configuration guidelines • To ensure data integrity, use only Acer-approved modules in 1 GB or 2 GB capacities.
English 28 5 Upgrading your computer To install a memory module: Note: DIMM slots on the mainboard must be installed only in certain configurations. Numbers next to DIMM slots correspond to installation sequence. DIMMs may be installed in pairs and in the correct order. 1 Perform steps 1 and 2 of the previous section. 2 Select an empty DIMM slot. 3 Open the holding clips on the DIMM slot. If you are replacing an existing DIMM, install the new DIMM in the same slot where you removed the DIMM.
6 Frequently asked questions
English 30 6 Frequently asked questions Frequently asked questions The following questions indicate possible situations that may arise during the use of your computer and each is followed by easy answers and solutions. I pressed the power button but the system did not boot up. Check the LED on the power button. If the LED is not lit, no power is being applied to the system. Try the following: • Check if you properly plugged the power cable into an electrical outlet.
31 If headphones, earphones or external speakers are connected to the line-out jack of your computer, the internal or built-in speakers are automatically turned off. System cannot read hard disk or optical disc drive information. Check the following: • Make sure you are using the correct type of disk. • Make sure the disc is inserted into the drive correctly. • Check if the disc is clean and unscratched. • Check your drive by using a good (undamaged) disc.
English 32 6 Frequently asked questions
7 Regulations and safety notices
English 34 7 Regulations and safety notices Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
35 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.
English 36 7 Regulations and safety notices Modem notices Notice for USA This equipment complies with Part 68 of the FCC rules. Located on the modem is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. Upon request, you must provide this information to your telephone company. If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily.
37 1 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
English 38 7 Regulations and safety notices Laser compliance statement The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. Digital audio output statement The optical connector contains no laser or light emitting diode (LED) more than Class I.
39 Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail: ru_jan@acer.com.tw And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.
English 40 Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product. The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse. R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: • Article 3.1(a) Health and Safety -. EN60950-1 -. EN62311 • Article 3.1(b) EMC -. EN301 489-1 -.
41 Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Remark: All images are for reference purposes only. Actual configuration may vary.
