User Guide

2 Chapter 1
Features
Performance
T Intel Pentium® IV processor with Intel NetBurst™ micro-architecture and integrated 256KB/512KB
on-die L2 cache memory in Flip Chip 2 (FC)-mPGA 478 socket form factor, with supporting CPU
clock up to 2.4GHz+.
T System Front Side bus speed:400 MHz.
T Maximum of 2GB DDR RAM within 2 DIMM sockets.
T Integrated LAN Controller.
T 3.5-inch and 5.25-inch floppy disk drives.
T CD-ROM/DVD-ROM /CD-RW drives
T 1x/2x/4x AGP slot
T High capacity, Enhanced-IDE hard disk
T Power management features
T CPU SMM (System Management Mode)
T Onboard PCI master enhanced local bus IDE (Embedded in 82801BA chipset).
T PIO mode 4
T Multiword DMA Mode 2
T Ultra DMA/33, Ultra DMA/66 & Ultra DMA/100 modes
T Plug-and-Play (PnP) feature
T ACPI 1.0 b Compliant Power management and Configuration Support
T Software shutdown for Windows 95/98/ME/2000/XP
T Hardware monitor function
Multimedia
T 128-bit graphics accelerator installed in the AGP Pro card slot
T An additional AGP card 1.5V slot, supports 2X and 4X
T Cathode-ray tube(CRT) support
T Liquid crystal display (LCD) support(optional)
T 3-D quality audio system via onboard audio controller
T Audio-in/Line-in, Audio-out/Line-out, Headphone-out, Mic-in, and Game/MIDI interface
NOTE: The system has dual RJ-11 phone jacks for line and phone on Modem card (option). One
microphone jack and one speaker jack on FPIO board.
Connectivity
T One AGP and three PCI slots
T One CNR slot
T USB and PS/2 compatible mouse and keyboard interfaces
T Two high-speed NS 16C550-compatible serial ports
T One multi-mode parallel port
T Four USB ports (available on front and rear panels) with Plug and Play function
T High-speed 56K V9.0 fax/data/voice PCI modem (optional)
T One RJ45 connector supports IEEE 802./802.3u 10Base-T/100Base-TX-compatible network with
remote wake-up function