Instruction Manual
Table Of Contents
- Aspire 5920G/5920 Series
- Information for your safety and comfort
- First things first
- Contents
- Acer Empowering Technology
- Your Acer notebook tour
- Specifications
- Indicators
- Easy-launch buttons
- Touchpad
- Using the keyboard
- Ejecting the optical (CD or DVD) drive tray
- Using a computer security lock
- Audio
- Using the system utilities
- Frequently asked questions
- Battery pack
- Acer Arcade (for selected models)
- Acer Arcade Deluxe (for selected models)
- Taking your notebook PC with you
- Securing your computer
- Expanding through options
- Power management
- Acer eRecovery Management
- Troubleshooting
- Regulations and safety notices
- FCC notice
- Modem notices
- Laser compliance statement
- LCD pixel statement
- Macrovision copyright protection notice
- Radio device regulatory notice
- General
- European Union (EU)
- The FCC RF safety requirement
- Canada - Low-power license-exempt radio communication devices (RSS-210)
- Federal Communications Comission Declaration of Conformity
- LCD panel ergonomic specifications
- Index
81
English
BIOS utility
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you do not
need to run this utility. However, if you encounter configuration problems, you
may need to run it.
To activate the BIOS utility, press <F2> during the POST; while the notebook PC
logo is being displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
Boot from the categories listed at the top of the screen.
Enable disk-to-disk recovery
To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,
then select Main from the categories listed at the top of the screen. Find D2D
Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this
value to Enabled.
Password
To set a password on boot, activate the BIOS utility, then select Security from
the categories listed at the top of the screen. Find Password on boot: and use
the <F5> and <F6> keys to enable this feature.