Instruction Manual
Table Of Contents
- Aspire 5920G/5920 Series
- Information for your safety and comfort
- First things first
- Contents
- Acer Empowering Technology
- Your Acer notebook tour
- Specifications
- Indicators
- Easy-launch buttons
- Touchpad
- Using the keyboard
- Ejecting the optical (CD or DVD) drive tray
- Using a computer security lock
- Audio
- Using the system utilities
- Frequently asked questions
- Battery pack
- Acer Arcade (for selected models)
- Acer Arcade Deluxe (for selected models)
- Taking your notebook PC with you
- Securing your computer
- Expanding through options
- Power management
- Acer eRecovery Management
- Troubleshooting
- Regulations and safety notices
- FCC notice
- Modem notices
- Laser compliance statement
- LCD pixel statement
- Macrovision copyright protection notice
- Radio device regulatory notice
- General
- European Union (EU)
- The FCC RF safety requirement
- Canada - Low-power license-exempt radio communication devices (RSS-210)
- Federal Communications Comission Declaration of Conformity
- LCD panel ergonomic specifications
- Index
73
English
Entering passwords
When a password is set, a password prompt appears in the center of the
display screen.
• When the Supervisor Password is set, a prompt appears when you press
<F2> to enter the BIOS utility at boot-up.
• Type the Supervisor Password and press <Enter> to access the BIOS utility.
If you enter the password incorrectly, a warning message appears. Try
again and press <Enter>.
• When the User Password is set and the password on boot parameter is
enabled, a prompt appears at boot-up.
• Type the User Password and press <Enter> to use the computer. If you
enter the password incorrectly, a warning message appears. Try again and
press <Enter>.
Important! You have three chances to enter a password. If you fail
to enter the password correctly after three tries, the system halts.
Press and hold the power button for four seconds to shut down
the computer. Then turn on the computer again, and try again.
Setting passwords
You can set passwords using the BIOS utility.