Technical information

52 Chapter 2
close the IRQ Resource submenu. In the Memory Resources submenu, use the first
item Reserved Memory Base to set the start address of the memory you want to
reserve for the ISA expansion card. Use the section item Reserve Memory Length to
set the amount of reserved memory. Press <Esc> to close the Memory Resources
submenu.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some non-standard VGA cards.
This board includes a built-in VGA system that does not require palette snooping so you must leave
this item disabled.
INT Pin 1-8 Assignment
It identifies the interrupt request (IRQ) line assigned to a device connected to the PCI interface of
your system.
Maximum Payload Size
This item specifies the maximum TLP payload size for the PCE Express devices. The unit is byte.