Owner's Manual
Table Of Contents
- Aspire series
- Contents
- System tour
- Setting up your computer
- Troubleshooting
- Taking care of your computer
- Important tips
- Cleaning and servicing
- When to contact a service technician
- ENERGY STAR guidelines compliance
- Declaration of conformity for EU countries
- Modem notices
- Important safety instructions
- Lithium battery statement
- Laser compliance statement
- Declaration of conformity for CE marking
- Federal Communications Comission declaration of conformity
5
English
Ensure that all items are present and in good condition. If any of the
following items are missing or appear damaged, contact your
dealer immediately:
• Aspire series
• PS/2 or USB keyboard (manufacturing option)
• PS/2 or USB mouse (manufacturing option)
• Speakers (selected models only)
• User's Guide and Starter poster
Other user documentation and third-party software.
Connecting peripherals
After everything is connected, plug the power cord into the system and
insert the other end into a power outlet.
Note: Don't connect the system power cord before connecting all
peripherals to the system.
Starting your computer
After connecting all the peripheral equipment, start your computer
according to the steps below:
1 Turn on all peripheral equipment, such as the monitor, printer,
fax, speakers, etc.
2 Turn on the system. Once the start up process is complete, you can
begin to use your computer.
Shutting down your computer
From the "Start" menu, select "Shut Down" and click OK.
In the event of a system crash, press and hold the power button on the
front of the system for four seconds. After the system has shut down,
turn off all peripheral devices.