Owner manual

English

Input lock

Press

to see the list of input sources (AV, HDMI, etc.). Use the up and down directional

keys to select the input source to block and then press

to lock. Press the

again to

unblock an input source.

Front panel lock

Lock or unlock the keys on the side panel.

Installation lock

Lock or unlock the setup menu.

Max volume

Set a maximum volume.

Change password

You can change the default password to a 4-digit code of your choice. If you are using the

parental controls, then we recommend you change the password periodically.

Clean all

Return all parental settings to default values, removing any changes.

Set up the TV

Open the Setup menu as described in the

OSD

navigation section. This menu provides the

following settings:

Language

Use these settings to adjust language.

Country

Select the country you live in to scan for the correct signals.

Tuner mode

Select a tuner mode:

Antenna

Cable

Channel install

Automatic search

Automatic search allows you to scan for channels. If you completed the setup wizard the first

time you turned on your TV, all available channels are listed.

Wait until the scan has finished; this will take several minutes. During the scanning process,

press

BACK

to abort halfway with all searched channels saved.

Automatic update

If the tuner mode is

Antenna

, you can use

Automatic

update to scan for new or deleted

channels.