Technical information

30 Chapter 1
Advanced Features
PIP/PBP/POP
• Press the PIP/PBP button once to display activate picture-in-picture (PIP).
• Press twice to activate picture-by-picture (PBP).
• Press three times to activate picture-on-picture (POP). Then, the POP screens will display the TV channel
programs one by one.
Note: The OSD menu is not available in PIP/POP/PBP modes.
PIP 1. Press the ACTIVE key to toggle between PIP
screens.
2. Press the TV, AV, COMPONENT or PC keys,
number keys or CH up or down to change the
content of the active screen.
3. Press the SWAP key to change the content
between the primary and the subscreen.
4. Press the POSITION key to select the location
of the subscreens, from upper left > upper
right > lower right> lower left, as shown in
the image.
5. Press the SIZE/MODE key to select the size of
the subscreen, from 25% > 37.5% > 50%, as
shown in the image.
PBP (Picture-by-Picture)
PIP (Picture-in-Picture)
PIP
PBP









POP (Picture-on-Picture)
POP POP POP
POP
POP
TV AV COMPONENT PC
PIP PIP
Swap
PIP PIP
PIP PIP
PIP