Users Manual

4.2. Connect WiFi

enable “Wi-Fi” as below:

2.1. Start “Connectivity” on the UI, and then

4.3. Connect Bluetooth

4.3.1. Start “Connectivity” on the UI, and

then enable Bluetooth as below:

4.2.2. Turn it “ON”--Select the WiFi name.

Input password and click “connect”.

4.3.2. Turn it “ON”, and choose your Bluetooth

device name to pair. Then you can enjoy

streaming audio to any Bluetooth enabled

speaker/earphone/headphone.

4.1. Turn On

Switch on the power button for 3~5 seconds. Or you also can press the power button on the remote

control when AC power adapter is connected.

After the initial UI appears, adjust the focus wheel on the projector to adjust the clarity of the image.

Note: Do not cover the device when it’s using. Otherwise, the device could overheat.

Getting Start