User Guide

System
Mode - Standard
HDMI(2.0)
Picture
Color
Input
Full
Hot Key Assignment
ProxiSense
Wide Mode
On
Off
Auto Source
Enter
Move
OSD
System
Audio
Pertormance
Mode - Standard
Auto
Picture
Color
USB Port Select
Off
Power-off
USB change
Enter
Move
OSD
System
Save Sengs to...
Audio
Pertormance
X
X
HDMI Black Level Normal
Quick Start Mode
Off
Rest Reminder
Off
Daisy Chain
Off
OffDPS
DDC/CI
On
PIP/PBP
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Input: Select the source fro
m HDMI(2.0) ,DP or DP ALT.
5. Auto Source: The default is “On”, which can support auto search for signal source in
order.
----------------------------------------------------------------------------------------------------------
Note:
Surround application must set Auto Source is “O󰀨”.
6. Daisy Chain: Default is O󰀨, can select daisy chain function Extend or Clone. Clone
mode is not supported with AdaptiveSync.
7. Wide mode: You can select which screen aspect you are using. The options are
Aspect, Full, 1:1 and 21:9.
8. PIP/PBP settings
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: Note:
1. PIP/PBP function does not support HDMI 1 and HDMI 2 simultaneously.
2. Under PIP & PBP mode, “Auto search” function is unavailable. The PIP/PBP
signal source needs to be selected manually.
PIP/PBP & Input status
HDMI 1 HDMI 2 DP