Operating Instructions

EN-23
Self-Timer
The self-timer can be used in situations such as group shots. When using this option,
you should either mount the camera on a tripod (recommended) or rest it on a flat,
level surface.
1. Secure the camera to a tripod or place it
on a stable surface.
2. Rotate the mode dial to , , , ,
, or .
3. Press the power switch to turn on the
power.
4. Press the four-way controller ( ) and
select your desired self-timer mode.
5. Press the button to confirm the setting.
6. Compose your scene and press the
shutter release button.
 The self-timer function is activated.
 The photograph is then taken after the preset time.
 To cancel the self-timer at any time, press the four-way controller ( ) or
press the shutter release button halfway.
The table below will help you choose the appropriate self-timer mode:
 After one shot is taken, the self-timer mode is turned off.
 If you wish to take another image using the self-timer, repeat these steps.
Self-timer mode Description
2 sec. Self-timer The image is captured about 2 seconds after the shutter
is pressed. This mode is useful for preventing camera
shake.
10 sec. Self-timer The image is captured about 10 seconds after the shutter
is pressed. This mode is suitable for the shots in which
the photographer has to be included.
10+2 sec. Self-timer The first image is captured about 10 seconds after the
shutter release button is pressed, and then the second
image is captured 2 seconds later. This mode is
convenient when capturing group images in succession.
Flash does not fire in this mode.
Ca
ptu
ptur
e Mod
e Mode
2 sec. Self-timer
2 sec. Self-timer
Capture Mode
2 sec. Self-timer
OK :
OK :
OK :