Installation Guide

ManualsBrandsAcer ManualsElectronicsCync Fixture Canless

Installation Guide

Cync Fixture

Canless

www.gelighting.com

The GE brand and logo are trademarks of the General Electric Company.

All values are design or typical values when measured under laboratory conditions.

Summary of content (5 pages)

PAGE 1
Installation Guide Cync Fixture Canless www.gelighting.com The GE brand and logo are trademarks of the General Electric Company. © 2020 GE Lighting. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
PAGE 2
PRODUCT COVERED Model CFIXCNLR4S1 CFIXCNLR6S1 CFIXCNLR4C1 CFIXCNLR6C1 Input voltage (Vac, Hz) 120, 60 120, 60 120, 60 120, 60 Current (mA) 110 130 110 130 Wattage (W) 13 16 13 16 DIMMING Compatible with Cync 3-wire smart switch. Do not compatible with regular dimmer. Download Cync App for dimming and other controls. BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING • Risk of fire or electric shock. Installation requires knowledge of luminaire electrical systems.
PAGE 3
INSTALLATION 1 Turn off power source at the main circuit breaker or fuse box. 3 Bring the supply power to junction box through knockout and secure with strain relief. Use the wire nuts to connect power supply wires to respective color wires in the junction box. 2 Drill hole in ceiling and prepare supply wire. Hole size CFIXCNLR4S1/ CFIXCNLR4C1 4 ¼ inch, CFIXCNLR6S1/ CFIXCNLR6C1 6 ¼ inch. 4 Place the junction box on the ceiling through cur hole. Connect the light with junction box with the connector.
PAGE 4
5 Hold the spring clips against the fixture and gently guide into the ceiling until the clips snap into place. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 5