Operating Instructions

EN-45
Photography Menu (Function tab)
1. Slide the mode switch to [ ] and set the
mode dial to one of the photography modes.
2. Press the MENU button, and select the
[Function] menu with the X button.
J The [Function] tab of the photography
menu is displayed.
3. Select the desired [Function] option item with
the S / T buttons, and press the SET button
to enter its respective menu.
4. Select the desired setting with the S / T
buttons, and press the SET button.
5. To exit from the photography menu, press the
MENU button.
Capture Mode
This sets the recording method at the time of capturing images.
*[Blank] Single: Capture an image at a time.
*[ ] Continuous: Permits continuous photography of 3 images max.
*[AEB] AEB: Permits 3 consecutive images in the order of standard
exposure, underexposure and overexposure compensation.
*[ ] Burst: Permits continuous photography while pressing holding the
shutter button. As long as you hold the shutter button
pressed, images are captured until the memory capacity
is exhausted.
* [ ] Pre-Shot: Pre-shot helps you get the background you want, even if
you need to ask someone else to record the image for you.
Basically, Pre-shot is a two-step process.
* [ ] Coupling Shot: The Coupling Shot mode lets you record images of two
people and combine them into a single image. This makes
it possible for you to include yourself in group images,
even when there is no one else around to record the
image for you.
J In [Continuous], [AEB], [Burst], [Pre-Shot] and [Coupling Shot] capture mode,
the voice memo is automatically fixed at [Off].
Dub
Refer to section in this manual titled “Recording Voice Memos” for further details.
* On / Off
J When [Preview] is set to [Off], [Dub] setting is also fixed at [Off].