User's Manual

EN-13
User’s Manual >>
Setting the Date and Time
The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow
these steps to set the correct date and time.
1. Slide the mode switch to [ ] and set
the mode dial to [ ].
The setup menu is displayed.
2. Select [Custom] with the W/X buttons.
3. Select [Date/Time] with the S /T
buttons, and press the SET button.
The Date/Time setting screen will
be displayed.
4. Select the item’s field with the W /X
buttons and adjust the value for the
date and time with the S/T buttons.
The date and time is set in the order
year-month-day-hour-minute.
The time is displayed in 24-hours
format.
5. After confirming all settings are correct,
press the SET button.
The setting will be stored and the
screen will return to the setup menu.
Adjust
01 01
01 01
2005