User's Manual

EN-53

User’s Manual >>

7. If you select [Single] in the previous step,

the figure shown on the right hand side

will appear.

Select the image that you want to

print with the W/X butons.

Select the printing number (up to 99)

with the S/T buttons.

After selecting the desired image and

printing number, press the SET button

to confirm.

8. Select [Exit] with the S/T buttons, and

press the SET button.

9. Select [Print] with the S/T buttons, and

press the SET button to start printing.

10.The printing starts and the figure shown

on the right hand side appears.

The [Complete] screen will be displayed

temporarily, reminding you that the

printing procedure is finished.

If a print error is detected, the [Print Error]

screen will be displayed.

The image printing may be failed if the power to the camera is accidentally

cut off. We recommend that you use the AC power adapter when

connecting the camera to the printer.

Select Page

Select Item

Adjust

Printing