User Guide

EN-33
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Slide the mode switch to [ ].
2. Select the image that you want to protect
with the W / X buttons.
3. Press the MENU button.
J The playback menu is displayed.
4. Select [Protect] with the S / T buttons, and
press the SET button.
5. Select [Single] or [All] with the S / T buttons,
and press the SET button.
6. Select [Set] with the S / T buttons, and press
the SET button.
J Protection is applied to the image and
the camera returns to the playback mode.
J The protect icon [ ] is displayed with
protected images. When [All] has been
selected, [ ] is displayed with all the images.
Play
SET:Adj.
MENU:Exit
Play
SET:Enter
MENU:Exit
Play
SET:Enter
MENU:Exit