User Guide

EN-41
CONNECTING TO A PICTBRIDGE COMPLIANT
PRINTER
If a printer that supports PictBridge is available, images can be printed by connecting
the digital still camera directly to the PictBridge-compatible printer without using a
computer.
Connecting the camera to the printer
1. Position the camera on the docking station.
2. Connect one end of the USB cable to the USB terminal of
the docking station.
3. Connect the other end of the USB cable to the USB
port on the printer.
4. Press the USB button.
J The USB menu appears on the screen.
5. Select [Printer] and press the SET button.
Printing images
When the camera is properly connected to a PictBridge compliant printer, the PictBridge
menu is displayed on the monitor.
1. Select the item you want to configure with the S / T
buttons, and press the SET button.
J [Images]: Select whether you want to print specific
image or all images. You may also
select printing number for specific
image.
J [Date Print]: According to the printer type, select
whether you want to print the image
with date imprint or not.
J [Paper Size]: Select the desired paper size according
to the printer type.
J [Layout]: Select the desired printing layout
according to the printer type.
J [Print]: After all settings are configured, select
this item to start printing.
2. If you select [Images] in the previous step, the figure
shown on the right hand side will appear. Select
[Select], [All] or [DPOF] with the S / T buttons, and
press the SET button.
J [Select]: Select to print one specific image.
J [All]: Select to print all images.
J [DPOF]: Select to print images with DPOF
settings.
SET:Enter
Images
PictBridge
SET:Enter
USB
SET:Enter