Operation Manual

English

Note: To ensure the projector works well with your computer, please

make sure the timing of the display mode is compatible with the

projector.

Note: * indicates an optional item.

Turning the projector on/off

Turning the projector on

1 Ensure that the power cord and signal cable are securely connected. The

power indicator LED will light blue.

2 Turn on the projector by pressing the POWER button on the control panel. The

power indicator LED will flash and then turn blue.

3 Turn on your source (computer, notebook, video player ,etc.). The projector

will detect your source automatically.

• If the screen displays the Lock and Source icons, it means the projector is

locked onto a specific source type and that input signal type is not

detected.

• If the screen displays No Signal, please make sure the signal cables are

securely connected.

• If you connect to multiple sources at the same time, use the SOURCE

button on the remote control to switch between inputs.

Power button