Operation Manual

English

Note: H. Position, V. Position and Frequency functions are not

supported under Component video, Video, S-Video and HDMI

modes.

Note: Tracking function is not supported under HDMI, Video and S-

Video modes.

Note: The unsupported functions will be grayed out.

Sharpeness Adjusts the sharpness of the image.

• Press to decrease the sharpness.

• Press to increase the sharpness.

H. Position

(horizontal

position)

• Press to move the image left.

• Press to to move the image right.

V. Position (vertical

position)

• Press to move the image down.

• Press to move the image up.

Frequency Frequency changes the projector's refresh rate to match the

frequency of your computer’s graphics card. If you can see a vertical

flickering bar in the projected image, use this function to make the

necessary adjustments.

Tracking Synchronizes the signal timing of the projector with the graphics

card. If you experience an unstable or flickering image, use this

function to correct it.

HDMI Color

Range

Adjust the color range of the HDMI image data to correct color

display errors.

• Auto: Automatically adjust using information from the player.

• Limited Range: Process the input image as limited color range

data.

• Full Range: Process the input image as full color range data.

HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen.

• Auto: Automatically adjust using information from the player.

• Underscan: Disable overscan on HDMI images.

• Overscan: Enable overscan on HDMI images.