User guide

Destinator PN User Guide
Page 66 of 118
Figure 37 - Map Cursor Dialog
1. Use the stylus to scroll or drag the map to a specific
point, and then tap the desired location.
2. A dialog box displays the address of that point, and
lets you select whether you want to navigate to it,
recalculate your route, add the point to your Favorites,
or set it as your Origin (if you are in Planner Mode).
3. To clear the cursor dialog, just tap the screen again.
4. If you are using a PPCPE device, you can also send
(as an SMS message) the location of any point on the
map to someone in your Contacts list. The SMS
message will automatically include the location of the
highlighted History item.
Tap on any point on the map and click on Send
Location. See Appendix C for more information about
sending locations.
If you need to reset the point of Origin, tap the map screen
to open the Cursor Dialog, and select Set As Origin. All
new route calculations will use this as the starting point, but
only if you are in Planner Mode. In Navigation Mode, your
current GPS location is always your Origin.
Dialog Box on the
Map Screen