Acer Liquid M320 Quick Guide Model: TM012 This revision: 07/2015 Product information For detailed product information, please go to www.acer.com. For service and support information, or to download the User Guide, drivers and applications, please follow the instructions below: 1. Go to www.acer.com and click Support > DRIVERS AND MANUALS. 2. Select appropriate items from Group > Series > Products. 3. Select the operating system from the drop-down menu.
Your s martphone 7 1 8 4 6 9 5 3 2 No. Item 1 3.5 mm headphone jack Connects to stereo headphones. Description 2 Micro USB connector Connects to a USB cable/charger. 3 Smartphone speaker Emits audio from your smartphone; suitable for holding to your ear. 4 Front-facing camera Use for self-portrait images and online video chat. 5 Touchscreen 4-inch capacitive touchscreen to display data, smartphone content and enter information.
Specifications Note Specifications may vary depending on region and configuration. Performance • 1.1 GHz quad-core processor • System memory (8 GB) : • 8 GB • Android operating system Display • 4.5” IPS LCD,FWVGA 480 x 854 16:9 ratio resolution Multimedia Formats supported: Type Formats Image JPEG, GIF, PNG, BMP Audio playback MP3, AMR, AAC LC, AAC+, eAAC+, Vorbis, FLAC, MIDI, WAVE Ringtone MP3, AMR, AAC LC, AAC+, eAAC+, Vorbis, FLAC, MIDI, WAVE Video recording H.263, H.
Connectivity • Bluetooth 4.0 + EDR • IEEE 802.11b/g/n • 86 :&'0$ %5 % 1700 % 0+] *60 0+] • HSPA / GPRS / EDGE • GPS Frequencies depend on model.
Camera • 5 MP rear camera • LED flash • 2 MP front camera • Fixed focus Expansion • microSD memory card slot (up to 32 GB) Battery • 2000 mAh Li-Polymer battery (replaceable) Note Length of battery operation will depend on power consumption which is based on system resource use. For example, constantly using the backlight or using power-demanding apps will shorten battery life between charges. Dimensions Height 136 mm Width 66.5 mm Thickness 9.
2 English Setting up for the first time Inserting the SIM cards and microSD card 1. Turn off the phone by pressing and holding the power button. 2. Insert your fingernail into the notch located at the bottom of the phone and remove the cover as illustrated.
3 English 3. Insert the SIM or microSD card as shown. microSD card Micro SIM 2 SIM 2 SIM 1 SD Micro SIM 1 4. Align the gold-colored connectors on the battery with the connectors at the top of the battery compartment and insert the battery.
4 English 5. Replace the cover by aligning the tabs on the cover into the slots on the phone. Gently press the cover until it snaps in place.
5 For initial use, you need to charge your smartphone for eight hours. After that you can recharge the battery as needed. Connect the AC adapter cord to the micro USB connector on your smartphone. Plug the AC adapter into any AC outlet and charge the device. It is normal for the phone to heat up when charging or during long periods of use. All phones are factory tested before release. Resetting and restarting the phone Open Settings from the Applications menu, then tap Backup & reset.
Safety Battery information This product uses a Lithium-polymer battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 °C (140 °F). Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage.
causes direct connection of the positive (+) and negative (-) terminals of the battery. These look like metal strips on the battery. This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery.
FCC regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC regulations This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
RF exposure information (SAR) This device meets the FCC/IC requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The unit of measurement for the FCC/IC limit is the "Specific Absorption Rate" (SAR). The SAR limit set by the FCC/IC is 1.6 W/kg, averaged over 1 g of tissue. The FCC and IC have granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC and IC RF exposure guidelines.
Informations sur l’exposition à la radiofréquence (DAS) Cet appareil est conforme aux exigences de la IC sur la limitation d’exposition du public général aux champs électromagnétiques pour protéger la santé. L’unité de mesure de la limite recommandée par la IC est le « débit d’absorption spécifique » (DAS). La limite DAS définie par la IC est 1,6 W/kg, sur une moyenne de 1 g de peau.