User`s guide

English

Onscreen Display (OSD) Menus

The projector has multilingual OSD that allow you to make image adjustments

and change a variety of settings.

Using the OSD menus

• To open the OSD menu, press "MENU" on the remote control.

• When the OSD is displayed, use the keys to select any item in the

main menu. After selecting the desired main menu item, press to enter

submenu for feature setting.

• Use the keys to select the desired item and adjust the settings by

using the keys.

• Select the next item to be adjusted in the submenu and adjust as described

above.

• Press "MENU" on the remote control, the screen will return to the main

menu.

• To exit OSD, press "MENU" on the remote control again. The OSD menu

will close and the projector will automatically save the new settings.

Note: Some of the following OSD settings may not be available. Please

refer to the actual OSD of your projector.

Note: Functions vary depending on model definition.

Main menu

Sub menu

Setting

Color

Display Mode

Wall color

Brightness

Contrast

Saturation

Tint

Color Temperature

Dynamic Black

Gamma

Off

Press

Video

Select

Adjust

Main Menu