Technical information
Table Of Contents
- COVER
- TOC
- System Specifications
- System Utilities
- Entering Setup
- Product Information
- Standard CMOS Setup
- Advanced Setup
- Advanced Chipset Setup
- Integrated Peripherals
- Integrated Peripherals-IDE Function Setup
- Integrated Peripherals-Onboard Device Setup
- Integrated Peripherals -Onboard I/O Chip Setup
- Power Management
- PCI/PnP Setup
- PC Health Status
- Frequency/Voltage Control
- Load Default Settings
- Set Supervisor/User Password
- Save & Exit Setup
- Exit Without Saving
- Machine Disassembly and Replacement
- Troubleshooting
- Jumper and Connector Information
- FRU (Field Replaceable Unit) List
61
Cable routing
Process:
1. Put master HDD Cable into HDD1 slot, And Put Slave HDD Cable into HDD2 slot
Remove Cables
Process:
1. Remove Audio cable from M/B “F-AUDIO”。
2. Remove card reader cable from M/B “USB2”
3. Remove USB1 cable from M/B “F_USB4”
4. Remove USB2 cable from M/B “F_USB3”
5. Remove recovery cable from M/B.
6. Remove the“Intrusion” cable from M/B.