Technical information
Table Of Contents
- COVER
- TOC
- System Specifications
- System Utilities
- Entering Setup
- Product Information
- Standard CMOS Setup
- Advanced Setup
- Advanced Chipset Setup
- Integrated Peripherals
- Integrated Peripherals-IDE Function Setup
- Integrated Peripherals-Onboard Device Setup
- Integrated Peripherals -Onboard I/O Chip Setup
- Power Management
- PCI/PnP Setup
- PC Health Status
- Frequency/Voltage Control
- Load Default Settings
- Set Supervisor/User Password
- Save & Exit Setup
- Exit Without Saving
- Machine Disassembly and Replacement
- Troubleshooting
- Jumper and Connector Information
- FRU (Field Replaceable Unit) List
67
Remove Cables
Process:
1. Remove 12V power cable from M/B connector “PWR2”.
2. Remove System fan cable from M/B connector “SYS FAN ”.
3. Remove P1 power cable from M/B connector “PWR”.
4. Remove heat sink cable from M/B connector “CPU_ FAN＂.
Remove the Insert TPM card and speaker
Process:
1. Remove the TPM card from M/B TPM connector (Optional by SKU).
2. Remove the speaker from Chassis.
P1 power cable
CPU- FAN
12V power cable
System fan cable