Operation Manual

English

9 Image is too small

or too large

• Adjust the zoom lever on the top of the projector.

• Move the projector closer to or further from the

screen.

• Press "MENU" on the remote control. Go to "Image -

-> Aspect Ratio" and try different settings or press

"RATIO" on the remote control to adjust directly.

10 Image has slanted

sides

• If possible, reposition the projector so that it is

centered on the screen.

• Press the "Keystone / " button on the remote

control until the sides are vertical.

• Press "MENU" on the remote control to open the

OSD menu. Go to "Image"->"Keystone" to make

adjustments.

11 Image is reversed

• Select "Image --> Projection" on the OSD and adjust

the projection direction.