Technical data

112 Chapter 6 Configuring the AMS200 Subsystem
6.1.3.2 When the FC Interface Board is Added
The AMS200 host interface implements two ports and two host connectors. One Fibre
Channel port configures the FC interface independent of another Fibre Channel port, and
implements one host connector.
Host Other Fibre
subsystem
Target ID (Port ID)
Fibre Channel
port
Fibre Channel
port
(Addition)
Target ID (Port ID)
Each Port ID must be unique and within
the range from 0 to EF (hexadecimal).
LUN 0 to LUN 255
(256LUs per host group and port
in the range of LUN0 to 511 at
the time of LU mapping)
Figure 6.2 Fibre Channel Port-to-LUN Addressing (When the FC Interface Board is Added)