Technical data

Acer | HDS AMS200 User and Reference Guide 121
6.6 AMS200 Subsystem General Configuration
Activating Management mode in Storage Navigator-Modular will enable you to do a general
configuration of the AMS200 subsystem. Before it is possible to configure the AMS200,
management mode must be enabled in Storage Navigator-Modular. Otherwise, it is only
possible to monitor the status of the AMS200.
To enable Management Mode:
1. From the Tools menu, click Operation Mode, and then click Set Password on the Main
screen.
2. Enter Old Password, New Password and New Password (for confirmation) and click OK.
Specify a password of up to 12 alphanumeric characters.
3. On the Tools menu, select Operation Mode, and then click Change. Alternatively, click
Change Mode on the toolbar.
4. When the password-input screen displays, enter a password and click OK. Management
Mode displays in Operation Mode in the upper part of the Main screen. The Storage
Navigator-Modular program operates in Management Mode.