Technical data

124 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem
This chapter provides information on the Fibre, NAS, and iSCSI models. The following table
illustrates sections that provide an explanation for each model.
 Fibre model: Connects disk array subsystem to a host computer with Fibre Channel
interface.
 NAS model: Connects NAS Unit connected to disk array subsystem to a host computer
with LAN interface.
 iSCSI model: Connects disk array subsystem to a host computer with iSCSI interface.
Sections Fibre NAS iSCSI
7.1 7.1.1 Microprogram { { {
7.1.2 System Parameters { { {
7.1.3 Configuration Information { { {
7.1.4 SNMP Information { { {
7.1.5 Storage for Parameters { { {
7.2 Setting Fibre Channel Information { − −
7.3 Setting iSCSI − − {
7.4 7.4.1 Setting a Spare Disk { { {
7.4.2 Canceling a Spare Disk Setting { { {
7.4.3 Setting a RAID Group { { {
7.4.4 Deleting a RAID Group { { {
7.4.5 Setting a Logical Unit { { {
7.4.6 Deleting the Last Logical Unit { { {
7.4.7 Formatting a Logical Unit { { {
7.4.8 Changing the Format Mode { { {
7.4.9 Changing the Default Controller in Charge of an LU { { {
7.5 7.5.1 Setting Mapping Information { − −
7.6 7.6.1 Setting Mapping Information − − {
7.7 Setting CHAP authentication information − − {
7.8 Transferring Configuration { { {
7.9 Storing Configuration Data { { {
7.10 Applying Configuration Data to Another AMS 200 Subsystem { { {
7.11 7.11.1 Simple Setting { − {
7.11.2 Detailed Setting for Each Host Connection { − {
7.12 Setting the Subsystem When Using Special Mode { { {
7.13 Changing the Network Parameter { { {
7.14 Changing the IP Address for the Maintenance Port { { {
7.15 Setting the System LU and User LU in the NAS System − { −
7.16 Setting the NNC Management LAN Port Information in the NAS System − { −
7.17 Setting Time Zone { { {
{: The explanation is provided.
—: The explanation is not provided.