Technical data

Acer | HDS AMS200 User and Reference Guide 185

7.12 Setting the Subsystem when using Special Mode

This operation (using the subsystem in drive blockade mode) is performed using Storage

Navigator-Modular.

Note: If the special mode setting operation is performed for the array unit connected to the

NAS unit, the cluster between the NAS Units stops. When the special mode setting operation

for the array subsystem is unavoidably performed, execute it after stopping the cluster

between the NAS Units and stopping the NAS OS of both NAS Units. Start the cluster between

the NAS Units again after completing the special mode setting operation for the array

subsystem.

1. On the Tools menu, select Configuration Settings. Alternately, click Configuration

Settings on the tool bar.

2. Click the Boot Option tab.

3. For the Drive Detach Mode, select the Enable radio button:

4. Click Apply.

5. A confirmation message box displays. Click OK.