Technical data

Acer | HDS AMS200 User and Reference Guide 189
7.14 Changing the IP Address for the Maintenance Port
This operation is performed using the Storage Navigator Modular.
Note: The IP address for the maintenance port is used for the maintenance work performed
by the maintenance personnel when a failure occurs. Keep one of the following network
addresses as an address for the maintenance work; "10.0.0.xxx", "192.168.0.xxx",
"192.168.233.xxx", "172.23.211.xxx", "10.197.181.xxx". Do not use this designated address for
other purposes.
Do not change the IP address for the maintenance port, if the change is not absolutely
needed.
To change the IP address for the maintenance port, follow these steps:
1. Turn on the power supply.
2. Start the Storage Navigator Modular and set the operation mode in Management Mode.
Refer to the Acer | HDS Adaptable Modular Storage and Workgroup Modular Storage
Storage Navigator Modular Graphical User Interface (GUI) User’s Guide (MK-95DF711).
3. Click the icon of an array unit on the Main window, and then select the File menu. Click
Open. Alternatively, click Display Details on the tool bar: