Technical data

240 Chapter 8 Troubleshooting
8.4.2 Checking the Progress Condition Display
If Booting... is indicated in the window (the controller is being started up), the progress of
the start-up operation can be confirmed according to the following procedure:
1. Turn on the page refresh mode (click the ON button).
The window is updated automatically at 5-second intervals. (If the OFF button of the
page refresh mode is activated, this operation is not necessary.)
If the page refresh mode is not activated in the main window, press the update button
of the browser to update the window.
2. Observe the condition-in-progress within the window.
If the start-up operation is completed, Boot completed is indicated in this part.
Figure 8.16 Progress Condition Display
Progress Condition display
Page Refresh Mode