Technical data

Acer | HDS AMS200 User and Reference Guide 283
Table B.2 Host Connection Parameters (continues on the next page)
Host Group Option- Simple Setting
Platforms Solaris™
Alternate Path None HDLM
(
Note1)
VxVM
(Note2)
MpxIO
(
Note5)
Fail Over None Sun
Cluster
(
Note4)
VCS
Note3
None Sun
Cluster
(
Note4)
None VCS
Note3
None Sun
Cluster
(
Note4)
Detail Setting: The following parameters will be selected automatically according to simple setting.
Standard Mode 9 9 9 9 9 9 9 9 9
Open VMS Mode
Wolfpack Mode
Host Connection Mode
1
(Select one of these
modes)
TRESPASS Mode
HP-UX
®
Mode
PSUE Read Reject
Mode
UA(06/2A00)
Suppress Mode
NACA Mode
HISUP OFF Mode
Reset Propagation
Mode
Unique Reserve
Mode 1
ASL Report Mode
(Active/Passive
Group)
ASL Report Mode
(Active/Passive)
ASL Report Mode
(Active/Active)
Port ID No Report
Mode
Port ID Conversion
Mode
TruCluster Mode
Product Serial
Response Mode
Same Node Name
Mode
CCHS Conversion
Mode
Host Connection Mode
2
(Multiple selections)
SPC-2 Mode
Additional Parameter: Select these parameters only when you use the appropriate function. When selected, the following parameters
belonged to the appropriate Host Connection Mode will be selected automatically.
Logical Unit Number more than or equals to 8 can be
recognized by HP-UX
®
Not Selected
TrueCopy is used by HP-UX
®
(Note 7) Not Selected