Technical data

Acer | HDS AMS200 User and Reference Guide vii
Preface
This document describes the physical, functional, and operational characteristics of the
AMS200 subsystem. This document also provides operation instructions, installation details,
and configuration planning information for the AMS200 subsystem.
This User and Reference Guide assumes:
 The user is familiar with the Acer | HDS AMS200™ array subsystem, and
 The user is familiar with the Windows
®
95, Windows
®
98, Windows
®
2000, or
Windows NT
®
operating systems. These versions are abbreviated to Windows in this
document.
This subsystem complies with FDA radiation performance standards 21CFR, subchapter J.
Notes:
 For further information, please contact your Hitachi Data Systems account team, or visit
the Hitachi Data Systems worldwide web site at http://www.hds.com
.
 The use of Acer | HDS AMS200 subsystem and all other Hitachi Data Systems products is
governed by the terms of your agreement(s) with Hitachi Data Systems.
Software Version
This document revision applies to Acer | HDS Adaptable Modular Storage and Workgroup
Modular Storage Products version 2.0 and higher.
EMI Regulation
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference in which case the user will be required to correct the interference at
his own expense. Testing was done with shielded cables. Therefore, in order to comply with
the FCC regulations, you must use shielded cables with your installation.