Technical data

78 Chapter 4 Subsystem Architecture and Components
4.7.4 Connector Locations and Functions
This section illustrates and describes the locations and functions for connectors in the
following hardware components:
 ENC unit
 Power unit
 Control unit
 RKNAS
4.7.4.1 ENC Unit
LASER KLASSE 1
CLASS 1
LASER PRODUCT
PATH 1 (to RKAJ or RKAJAT IN)
PATH 0 (to RKAJ or RKAJAT IN)
PATH 1 (from RKS, RKAJ or RKAJAT)
PATH 0 (from RKS, RKAJ or RKAJAT)
Control Unit (RKS)
ENC Unit
PATH 1 (to RKAJ or RKAJAT IN)
PATH 0 (to RKAJ or RKAJAT IN)
PATH 0/PATH 1 (from RKS, RKAJ, or RKAJAT)
PATH 0/PATH1 (to RKAJ or RKAJAT IN)
SENC Unit
Figure 4.23 ENC Unit Connector Locations
Table 4.11 Power Unit Connector Functions
Connector Function
PATH 0 Connection connector for RKAJ Unit ID = 0n (n=0,1,2....E)
Connection connector for RKAJAT Unit ID = 2n (n=0,1,2....E)
PATH 1 Connection connector for RKAJ Unit ID =0n (n=0,1,2....E)
Connection connector for RKAJAT Unit ID =3n (n=0,1,2....E)