Operation Manual

44 - Advanced settings
System
Setting the date and time
To set the date and time, open Settings > Date & time.
To set an alarm see Setting an alarm on page 25.
Updating your tablet’s operating system
Your tablet can download and install system updates, adding support
for new devices or expanding software options.
To check for operating system, or ’firmware’, updates, open Settings
> About tablet > System updates > CHECK NOW.
Resetting your tablet
A data reset, or format, restores your tablet to factory settings.
To perform a reset, open Settings then tap Backup & reset > Factory
data reset
; tap RESET TABLET and then ERASE EVERYTHING .
Note
If you travel frequently or live in an area that uses daylight saving time, and
have mobile network access, activate Automatic time zone. Your tablet will
set the date and time based on information it receives from the network.
Note
Downloading new firmware can take up to 40 minutes, depending on your
network speed. Do not press the power button or access your tablet in any
way during a system upgrade to prevent firmware installation failure.
Important
This will erase all your personal information, any contacts stored on
your tablet and any programs you installed.