IEEE 802.11b WLAN PC Card User's Guide

19
!
Caution:
WEP needs to be the same for all IEEE802.11b stations.
Follow the steps below to set your WEP:
(1) Select the data privacy algorithm you want (64 or 128 bit WEP type)
(2) Type Passphrase
(3) Click “ Generate “ to generate automatically the corresponding WEP key.
If select 64 bit WEP type, 4 sets of WEP key will be generated; if select
128 bit WEP type, only one set WEP key will be generated.
(4) Choose one key (under 64 bit WEP type)
(5) Click “ Write “ and then press “ OK “. WEP encrypts each frame
transmitted from the radio, using one of the keys entered from this panel.
(6) If you select “ Manual “, you can type the 64bit WEP key manually.
Especially note that all the blanks of WEP key have to be filled by manual
typing. Click on “ Clear “ you can clean away all the settings of Ecryption.
2.4.2.3 Country
Every country has different legal frequency range. Please choose proper country
setting. Under the infrastructure mode, the setting value will be determined by the
Access Point and can’t be set by users.