Technical information

66 Chapter 3
Disassembling the Lower Case
Removing the Smart Card Bracket
1.
See “Removing the Battery Pack” on page 51
2.
See “Removing the Middle Cover” on page 57
3.
See “Removing the Keyboard” on page 58
4.
See “Removing the LCD Module” on page 59
5.
See “Removing the LAN Board” on page 64
6.
See “Removing the Upper Case” on page 65
7.
To remove the smart card bracket, first disconnect the smart card FPC cable from the HDD transfer board.
8.
Remove two screws then detach the smart card bracket from the lower case.
Removing the HDD Transfer Board
1.
See “Removing the Battery Pack” on page 51
2.
See “Removing the Middle Cover” on page 57
3.
See “Removing the Keyboard” on page 58
4.
See “Removing the LCD Module” on page 59
5.
See “Removing the LAN Board” on page 64
6.
See “Removing the Upper Case” on page 65
7.
See “Removing the Smart Card Bracket” on page 66