Table of Contents User Manual DV550L DV650C / DT650C Table of Contents Safety Warnings and Precautions................................... 1 Important Safety Instructions ............................................. 2 Notes on the LCD Panel of This Display ............................ 2 Copyright............................................................................ 3 Disclaimer........................................................................... 3 Package Contents .............................
ii Table of Contents Connecting the AV and S-Video Inputs ............................................ 15 Connecting External Speakers.......................................................... 16 Connecting Multiple Displays............................................................ 17 Connecting the Touch Module............................................18 Connecting Power...............................................................19 Using the Touch Screen (for Touch Model Only) ............
Safety Warnings and Precautions 1 Safety Warnings and Precautions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
2 Safety Warnings and Precautions Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Safety Warnings and Precautions 3 Copyright Copyright 2011. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the manufacturer.
4 Package Contents Package Contents Open the sales package and check the contents. If any item is missing or damaged, please contact your dealer immediately. YPbPr LCD display Power cord AAA batteries Quick start guide Mini D-Sub (15pin) cable Remote control Notes: • The type of power cord supplied may differ from that illustrated depending on your region of purchase. • Before discarding the package, check that you haven't left any accessories inside the box.
Parts of the Display and Their Functions Parts of the Display and Their Functions Front Panel No. Name Description • Receives command signals from the remote control. • Detects ambient lighting conditions around the display and adjusts screen brightness automatically when the Ambient Light Sensor function is activated. • Indicates the operating status of the display: - Lights up green when the power is turned on.
6 Parts of the Display and Their Functions Input/Output Terminals 13 8 1 2 3 4 No. Name 5 6 7 9 10 11 12 14 15 16 Description Receives audio signals from an external device (such as a computer). Outputs audio signals from an audio or HDMI input source to an external device. Outputs audio signals from an audio or HDMI input source to external speakers.
Parts of the Display and Their Functions Remote Control 1 6 INFO Shows the current input source and resolution. 9 7 VGA Selects the VGA input source. 8 DVI Selects the DVI input source. 2 9 Power Turns on the display or puts it in standby mode. 10 3 11 4 13 11 ENTER Confirms your selection or save changes. 14 12 15 • Scrolls through settings and options in the OSD menu. • Turns up the volume. 12 5 6 7 YPbPr 8 10 EXIT Returns to a previous menu or closes the OSD menu.
8 Parts of the Display and Their Functions Using the Remote Control Installing Remote Control Batteries 1. Open the remote control battery compartment cover. 2. Insert the supplied batteries ensuring that the positive and negative marked battery terminals match the (+) and (-) marks in the battery compartment. Note: The supplied batteries are provided for your convenience so that you can operate the display straight away. You should replace them as soon as possible. 3.
Setting Up the Display 9 Setting Up the Display Mounting the Display You can install the display on a vertical surface with a suitable wall mounting bracket or on a horizontal surface with the optional desktop stands. Please pay attention to the following notes during installation: • This display should be installed by at least two adult persons. Attempting to install this display by only one person may result in danger and injuries. • Refer the installation to qualified technicians.
10 Setting Up the Display 5. Install the wall mounting bracket on the display and attach the display to the wall according to the mounting bracket’s instructions. The length of the screw should exceed the thickness of the wall mounting bracket by at least 10 mm. Make sure that all screws are tightened and secured properly. (Recommended torque: 470 635N•cm). The mounting means should be strong enough to bear the weight of the display (about 28 kg without the stands).
Setting Up the Display 11 Connecting Audio/Video Signals Pay attention to the following notes when you connect cables: • Please turn off all devices. • Familiarize yourself with the audio/video ports on the display and the devices you want to use. Be aware that incorrect connections may adversely affect picture quality. • Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the connectors at the end of the cable.
12 Setting Up the Display Connecting the Digital Input 1. Connect the VIDEO IN (DVI-D) jack on the display to the DVI-D output jack on a computer using a DVI-D cable. If the computer has an HDMI output jack, connect the computer’s HDMI output jack to the VIDEO IN (HDMI) input jack on the display using an HDMI cable or a DVI-D to HDMI conversion cable. 2. Connect the computer’s audio output jack to the AUDIO IN (AUDIO1) jack on the display using a suitable audio cable. 3.
Setting Up the Display 13 Connecting the YPbPr Component Video Input 1. Connect the VIDEO IN (COMPONENT) jacks on the display to the component output jacks on an A/V device (such as a VCR or DVD player) using a component video cable. 2. Connect the DVD player’s audio output jacks to the AUDIO IN (AUDIO2 or AUDIO3) jacks on the display using a suitable audio cable. 3. To view video image from this input, press the YPbPr button on the remote control.
14 Setting Up the Display Connecting the AV and S-Video Inputs 1. Connect the VIDEO IN (S-VIDEO) or VIDEO IN jack on the display to the output jack on an A/V device (such as a VCR) using an appropriate video cable. 2. Connect the VCR’s audio output jacks to the AUDIO IN (AUDIO2 or AUDIO3) jacks on the display using a suitable audio cable. 3. If a second display is used, connect the VIDEO-OUT jack on the first display to the VIDEO IN jack on the second display using an AV cable.
Setting Up the Display Connecting External Speakers The built-in amplifier on the display allows you to output audio signals through external speakers. Connect external speakers to the SPEAKERS (R/L) jacks on the display. External speakers Note: You can use the remote control or the control panel on the display to adjust the volume.
16 Setting Up the Display Connecting Multiple Displays With the RS232C IN/OUT interfaces, you can connect multiple displays serially (daisy chain) to a computer for management. The number of displays you can connect serially depends on the resolution of the input signal you use. RS-232C cable RS-232C cable Computer RS-232C cable Note: This function requires an RS-232C port equipped computer with the display management software installed.
Setting Up the Display 17 Connecting the Touch Module (for the DV650C only) There are two ways to connect the touch module. 1. Connect the USB cable on the display to a PC. The touch module supports easy Plug-and-Play operations. There is no need to install additional drivers on the PC. 2. Install an OPS (Open Pluggable Specification) module in to the slot on the rear of the display. Refer to the module’s documentation for user instructions.
18 Setting Up the Display Connecting Power 1. Plug one end of the power cord into the AC IN jack on the display and the other end into an appropriate power outlet (if the outlet is switched, turn on the switch). 2. Press the power switch to turn on the main power. The display will enter standby mode and the power indicator will light up amber. 2 1 Notes: • The supplied power cord is suitable for use with 110-240V AC power only.
Using the Touch Screen (for Touch Model Only) 19 Using the Touch Screen (for Touch Model Only) You can use the optical touch screen to control your operating system. The touch screen can emulate basic mouse functions and supports multi-touch functions for Windows 7*. The following table shows a list of gestures you can use on the touch screen. Note: Ensure that you have installed the USB cable on the display to a computer.
20 Using the Touch Screen (for Touch Model Only) OS functions Gesture actions For Windows Vista and Windows 7 Drag one finger left or right. Selection Quickly drag your finger (Flick) in a desired direction. Pan up / Pan down / Back / Forward Multi-touch functions For Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions 1. Press on the target. 2. Tap the screen with another finger. 3. Release the second finger. Right-click Drag one or two fingers up or down.
Using the Touch Screen (for Touch Model Only) OS functions Gesture actions • Move two fingers in opposing directions. • Use one finger to pivot around another. Supported by specific applications Tap two fingers simultaneously. The target should be the midpoint between the fingers. Supported by specific applications For Windows XP, Windows Vista and Windows 7 Press and hold for 4 seconds.
22 Using the Touch Screen (for Touch Model Only) Calibrating the Touch Screen (for Touch Model Only) • The function described in this section only applies to Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions. • Ensure that you have installed the USB cable on the display to a computer. You can calibrate the touch screen to use it more efficiently. To adjust calibration: 1. In Windows, tap the Start button and then Control Panel.
Basic Operations 23 Basic Operations Turning the Display On or Off To turn on or off the display, press the power button on the display’s control panel or on the remote control. Notes: • The display’s standby mode still consumes power. To completely cut off power supply, disconnect the power cord from the power outlet. • The display follows the VESA approved DPM Power Management function.
24 The OSD (On-Screen Display) Menu The OSD (On-Screen Display) Menu OSD Menu Overview Menu name Options/functions Picture • Picture Mode • Contrast • Brightness • Color • Tint • Sharpness • Backlight • DCR • Color Temp • Input Resolution See page 26 Sound • Volume • Mute • Audio Source • Speaker 28 Option • Aspect ratio • PIP • Video Source • Auto Adjustment • Clock Frequency • Phase • H Position • V Position • Ambient Light Sensor • Auto Detection • Touch Feature 29 Setting • Language • Ove
The OSD (On-Screen Display) Menu Operations in the OSD Menu Using the control panel buttons Using the remote control 1. Press MENU to open the OSD menu. 1. Press MENU to open the OSD menu. ENTER VIDEO SOURCE 2. In the OSD menu, press or to select an item. 2. Press or to select an item. ENTER VIDEO SOURCE 3. Press ENTER/VIDEO SOURCE to confirm selections. 3. Press ENTER to confirm selections. ENTER TER VIDEO SOURCE 4. Press or to select a feature and press or to adjust settings.
26 The OSD (On-Screen Display) Menu Picture Menu Picture Picture Mode Contrast Brightness Color Tint Sharpness Backlight DCR Color temp. Input Resolution :Move Name Enter :Input Standard 88 43 55 50 5 5 OFF 9300 K Auto Exit :Exit Description Picture Mode Sets the display mode. Contrast Adjusts the image contrast when Picture Mode is set to User. Brightness Adjusts the image brightness when Picture Mode is set to User. Color Adjusts the color intensity when Picture Mode is set to User.
The OSD (On-Screen Display) Menu 27 Adjusting the Contrast 1. Set the contrast to the highest level. 2. Gradually decrease the contrast level until you reach the point where the details in the bright areas of the image can be seen clearly. Do not further decrease the contrast level to avoid losing the saturation of colors. Adjusting the Brightness 1. Set the brightness to the lowest level. 2.
28 The OSD (On-Screen Display) Menu Sound Menu Sound Volume Mute Audio Source Speaker :Move 8 OFF Audio 1 Enter :Input Name Description Volume Adjusts the volume. Mute Turns the mute function on or off. Exit :Exit Sets the audio input source. Audio Source Audio 1 Audio 2 HDMI Audio 3 Speaker Sets the audio source. • External: Selects the audio output source from SPEAKERS (R/ L) on the rear connector panel.
The OSD (On-Screen Display) Menu 29 Option Menu Option Aspect ratio PIP Video Source Auto Adjustment Clock Frequency Phase H Position V Position Ambient Light Sensor Auto Detection Touch Feature :Move Enter :Input Full YPbPr 16 22 OFF ON OFF Exit :Exit Name Description Aspect ratio Displays the input image in its original aspect ratio (Original) or forces the display to fill the input image on the entire display area (Full). • ON/OFF: Turns on or off the PIP function.
30 The OSD (On-Screen Display) Menu Setting Menu Setting Language Overscan Schedule Display Wall Power Save Set Monitor ID Image Retention Auto Adjustment Advanced :Move Enter :Input English ON 1 ON ON Exit :Exit Name Description Language Sets your preferred language for the OSD menu. Overscan Turns the HDMI overscan function on or off. • Date and Time: Sets the current date and time. • Schedule: Sets when to turn on or off the display and which input source should be used for each schedule.
The OSD (On-Screen Display) Menu 31 Image Retention Automatically displays swift moving patterns every 10 seconds to prevent image retention on the screen. Auto Adjustment Automatically optimizes image display for the VGA input. Advanced • Reset User Default: Resets all OSD settings (except the Language setting) to the factory settings. • OSD Info Box: When turned ON, the display will always show the current input source and resolution onscreen.
32 Product Information Product Information Specifications Item LCD panel Specifications DV550L Active area (H x V mm) Pixel pitch (mm) Native resolution (pixels) Brightness (cd/m2) (typical) Contrast (typical) Response time (ms) (typical) Computer Input Video Audio Control Computer Video Output Audio Power Environment Mechanical Speaker Audio Control Audio W (Amp) Internal speaker Supply Consumption Max.
Product Information Item LCD panel Specifications DV650C Active area (H x V mm) Pixel pitch (mm) Native resolution (pixels) Brightness (cd/m2) (typical) Contrast (typical) Response time (ms) (typical) Computer Input Video Audio Control Computer Video Output Audio Power Environment Mechanical 33 Speaker Audio Control Audio W (Amp) Internal speaker Supply Consumption Max.
34 Product Information Item LCD panel Touch Glass Input Output Audio Power Environment Mechanical Specifications DT650C Active area (H x V mm) Pixel pitch (mm) Native resolution (pixels) 1428.48 x 803.52 0.
Product Information Supported Input Signal Resolution Resolution AV 640 x 480 @ 60Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 720 x 400 @ 70Hz 800 x 600 @ 60Hz 800 x 600 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 75Hz 1280 x 768 @ 60Hz 1280 x 960 @ 60Hz 1280 x 1024 @ 60Hz 1360 x 768 @ 60Hz 1366 x 768 @ 60Hz 1600 x 1200 @ 60Hz 1920 x 1080 @ 60Hz 576i (50Hz) 480i (60Hz) 480p (60Hz) 576p (50Hz) 720p (50Hz) 720p (60Hz) 1080i (50Hz) 1080i (60Hz) 1080p (50Hz) 1080p (60Hz) Note: • : supported • Blank: not supported S-Vide
36 Product Information Supported PIP Input Signal Combination AV AV S-Video Sub picture VGA signal YPbPr source DVI HDMI Main picture signal source S-Video VGA YPbPr DVI HDMI
Product Information 37 Supported Signal Source and Resolution in PIP Mode Notes: • : supported • Blank: not supported Main picture DVI 1920 x 1080 @ 60Hz 1920 x 1080 @ 60Hz 1600 x 1200 @ 60Hz 1600 x 1200 @ 60Hz 1366 x 768 @ 60Hz 1366 x 768 @ 60Hz 1360 x 768 @ 60Hz 1360 x 768 @ 60Hz 1280 x 1024 @ 60Hz 1280 x 1024 @ 60Hz 1280 x 960 @ 60Hz 1280 x 960 @ 60Hz 1280 x 768 @ 60Hz 1280 x 768 @ 60Hz VGA 1024 x 768 @ 75Hz 1024 x 768 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 60Hz 800 x 600 @ 75Hz 800
38 Product Information Main picture VGA 1600 x 1200 @ 60Hz 1920 x 1080 @ 60Hz 1920 x 1080 @ 60Hz 1366 x 768 @ 60Hz 1600 x 1200 @ 60Hz 1360 x 768 @ 60Hz 1366 x 768 @ 60Hz 1280 x 1024 @ 60Hz 1360 x 768 @ 60Hz 1280 x 960 @ 60Hz 1280 x 1024 @ 60Hz 1280 x 768 @ 60Hz 1280 x 960 @ 60Hz DVI 1024 x 768 @ 75Hz 1280 x 768 @ 60Hz 1024 x 768 @ 60Hz 1024 x 768 @ 75Hz 800 x 600 @ 75Hz 1024 x 768 @ 60Hz 800 x 600 @ 60Hz 800 x 600 @ 75Hz 720 x 400 @ 70Hz 800 x 600 @ 60Hz 640 x 480 @ 75Hz 720 x 400
Product Information 39 Main picture HDMI 1280 x 1024 @ 60Hz 1360 x 768 @ 60Hz 1366 x 768 @ 60Hz 1600 x 1200 @ 60Hz 1920 x 1080 @ 60Hz 576i (50Hz) 1280 x 960 @ 60Hz 480i (60Hz) 1280 x 768 @ 60Hz 480p (60Hz) 1024 x 768 @ 60Hz VGA 1024 x 768 @ 75Hz 576p (50Hz) 800 x 600 @ 75Hz 720p (50Hz) 800 x 600 @ 60Hz 720p (60Hz) 720 x 400 @ 70Hz 1080i (50Hz) 640 x 480 @ 75Hz 1080i (60Hz) 640 x 480 @ 72Hz 1080p (50Hz) 1080p (60Hz) Sub picture 640 x 480 @ 60Hz
40 Product Information Main picture HDMI 1600 x 1200 @ 60Hz 1920 x 1080 @ 60Hz 1920 x 1080 @ 60Hz 1366 x 768 @ 60Hz 1600 x 1200 @ 60Hz 1360 x 768 @ 60Hz 1366 x 768 @ 60Hz 1280 x 1024 @ 60Hz 1360 x 768 @ 60Hz 1280 x 960 @ 60Hz 1280 x 1024 @ 60Hz 1280 x 768 @ 60Hz 1280 x 960 @ 60Hz VGA 1024 x 768 @ 75Hz 1280 x 768 @ 60Hz 1024 x 768 @ 60Hz 1024 x 768 @ 75Hz 800 x 600 @ 75Hz 1024 x 768 @ 60Hz 800 x 600 @ 60Hz 800 x 600 @ 75Hz 720 x 400 @ 70Hz 800 x 600 @ 60Hz 640 x 480 @ 75Hz 720 x 400
Product Information 41 Main picture VGA 1366 x 768 @ 60Hz 1600 x 1200 @ 60Hz 1920 x 1080 @ 60Hz 576i (50Hz) 480i (60Hz) 480p (60Hz) 576p (50Hz) 720p (50Hz) 1920 x 1080 @ 60Hz 1360 x 768 @ 60Hz 1600 x 1200 @ 60Hz 1280 x 1024 @ 60Hz 1366 x 768 @ 60Hz 1280 x 960 @ 60Hz 1360 x 768 @ 60Hz HDMI 1280 x 1024 @ 60Hz 1280 x 768 @ 60Hz 1280 x 960 @ 60Hz 1024 x 768 @ 75Hz 1280 x 768 @ 60Hz 1024 x 768 @ 60Hz 1024 x 768 @ 75Hz 800 x 600 @ 75Hz 1024 x 768 @ 60Hz 800 x 600 @ 60Hz 800 x 600 @ 75Hz 720
Product Information 42 Main picture VGA 1920 x 1080 @ 60Hz 1600 x 1200 @ 60Hz 1366 x 768 @ 60Hz 1360 x 768 @ 60Hz 1280 x 1024 @ 60Hz 1280 x 960 @ 60Hz 1280 x 768 @ 60Hz 1024 x 768 @ 75Hz 1024 x 768 @ 60Hz 1080p (60Hz) 800 x 600 @ 75Hz 1080p (50Hz) 800 x 600 @ 60Hz HDMI 1080i (60Hz) 720 x 400 @ 70Hz 1080i (50Hz) 640 x 480 @ 75Hz 720p (60Hz) 640 x 480 @ 72Hz 640 x 480 @ 60Hz Sub picture
1920 x 1080 @ 60Hz 1600 x 1200 @ 60Hz 1366 x 768 @ 60Hz 1360 x 768 @ 60Hz 1080p (60Hz) 1280 x 1024 @ 60Hz 1080p (50Hz) 1280 x 960 @ 60Hz 1080i (60Hz) 1280 x 768 @ 60Hz 1080i (50Hz) 1024 x 768 @ 75Hz 720p (60Hz) 1024 x 768 @ 60Hz 720p (50Hz) YPbPr 800 x 600 @ 75Hz 576p (50Hz) 800 x 600 @ 60Hz 480p (60Hz) 720 x 400 @ 70Hz 480i (60Hz) 640 x 480 @ 75Hz 576i (50Hz) 640 x 480 @ 72Hz 640 x 480 @ 60Hz Sub picture 43 Product Information Main picture DVI
44 Product Information Main picture YPbPr 1024 x 768 @ 75Hz 1280 x 768 @ 60Hz 1280 x 960 @ 60Hz 1280 x 1024 @ 60Hz 1360 x 768 @ 60Hz 1366 x 768 @ 60Hz 1600 x 1200 @ 60Hz 1920 x 1080 @ 60Hz 576i (50Hz) DVI 480i (60Hz) 1024 x 768 @ 60Hz 480p (60Hz) 800 x 600 @ 75Hz 576p (50Hz) 800 x 600 @ 60Hz 720p (50Hz) 720 x 400 @ 70Hz 720p (60Hz) 640 x 480 @ 75Hz 1080i (50Hz) 640 x 480 @ 72Hz 1080i (60Hz) 640 x 480 @ 60Hz 1080p (50Hz) 1080p (60Hz) Sub picture
Product Information 45 Main picture HDMI 1080i (60Hz) 1080p (50Hz) 1080p (60Hz) 576i (50Hz) 1080i (50Hz) 480i (60Hz) 720p (60Hz) 480p (60Hz) 720p (50Hz) 576p (50Hz) YPbPr 720p (50Hz) 576p (50Hz) 720p (60Hz) 480p (60Hz) 1080i (50Hz) 480i (60Hz) 1080i (60Hz) 576i (50Hz) 1080p (50Hz) 1080p (60Hz) Sub picture
46 Troubleshooting Troubleshooting Problem Solution No picture Check the following: • Is the display turned on? Check the power indicator of the display. • Is the signal source device turned on? Turn on the device and try again. • Are there any loose cable connections? Make sure that all cables are connected firmly. • Have you chosen an unsupported output resolution on the computer? Refer to "Supported Input Signal Resolution" on page 35 to select a supported resolution and try again.
Troubleshooting 47 • Have you locked the remote control function? Unlock the function and try again. • Check for incorrect battery orientation. • Check for dead batteries. • Check your distance and angle from the display. • Check whether remote control is properly being pointed at the display’s remote control sensor window. The remote control does • Check for any obstacle between the remote control and not work the remote control sensor window.
48 Troubleshooting
