Operation Manual

English

Onscreen Display (OSD) Menus

The projector has multilingual OSD that allow you to make image adjustments

and change a variety of settings.

Using the OSD menus

• To open the OSD menu, press "MENU" on the remote control or control

panel.

• When the OSD is displayed, use the keys to select any item in the

main menu. After selecting the desired main menu item, press to enter

submenu for feature setting.

• Use the keys to select the desired item and adjust the settings by

using the keys.

• Select the next item to be adjusted in the submenu and adjust as described

above.

• Press "MENU" on the remote control or control panel, the screen will

return to the main menu.

• To exit OSD, press "MENU" on the remote control or control panel again.

The OSD menu will close and the projector will automatically save the new

settings.

Note: Some of the following OSD settings may not be available. Please

refer to the actual OSD of your projector.

Note: Functions vary depending on model definition.

Main menu

Sub menu

Setting