Specifications

PC/II+p Board Technical Reference Manual 41

7.8 Fan Connector – J008

The FAN connector (J008) is a basic feature on PC/II+p boards and is always shipped. This connector

supplies +5V and Ground pins which may be used to power a CPU-mounted fan.

For PC/II+p systems containing a high performance version of the processor, a fan may be used for cooling

purposes, depending upon the application. Lower speed processor configurations may not require a fan to

be installed. However, the thermal characteristics of the enclosure may dictate the use of a fan, and this

depends upon the application.

7.8.1 Fan Connector – J008 – Pinout

J008 is shipped as a 1X2 .100" pitch pin header.

Table 14 Signals – Fan J008 – 1x2 .100 inch Pin Header

PIN NAME PIN# SIGNAL NAME SIGNAL DESCRIPTION

+5V

1 +5V +5V

GND

2 GND Ground