Specifications

PC/II+p Board Technical Reference Manual 42

7.9 Flash ROM – BIOS

The standard ROM on the PC/II+p is a 2 Mbit (256K Byte) flash EEPROM. This EEPROM contains the

system BIOS and all option BIOS modules, including the SVGA BIOS and any other bios modules required

to interface to on-board peripherals. All PC/II+p boards are shipped with a flash BIOS.

BIOS code is shadowed in system memory located between C0000h and FFFFFh. The system BIOS code

occupies the top segment of real mode memory (F0000h to FFFFFh). Option ROM BIOS modules are

shadowed into the region C0000h to DFFFFh. Option BIOS modules will be loaded depending upon the

configuration of the PC/II+p board.

The following tables describe the drivers that are available for use with the PC/II+p board. Both drivers and

optional ROM BIOS modules are listed. Please contact Megatel if you have specific requirements, and to

receive the driver information, or visit our web site.

Table 15 ETHERNET Drivers & Utilities

DRIVER NAME REVISION

Netware ODI DOS Client 2.62

Netware ODI OS/2 Client 2.59

Netware ODI Server Driver 2.60

OS/2 NDIS2 Driver 2.68

DOS NDIS2 Driver 2.68

Windows NT/95 NDIS3 Driver 3.20

Windows for Workgroup NDIS3 Driver 2.57

Packet Driver 2.55

Setup utility 2.66

Table 16 VIDEO Drivers & BIOS Options

DRIVER NAME REVISION

HiQVideo Driver for Win NT 3.5x 1.1.5

HiQVideo Driver for Win 95 1.2.6

Display Driver for Windows 3.x 1.3.2

Display Driver for OS/2 2.2.7

HiQVideo VGA BIOS 2.0.0