Specifications

PC/II+p Board Technical Reference Manual 5

REVISION MT002613 2001/01/28

Release Version for PC/II+p v2.03

NOTE: This revision of PCB Version 2.03 provides full support for the Intel Embedded Low Power 266 MHz

processor.

Notice of new document MT004702, "Ethernet Appbook" added to Ethernet Section 38

Interrupt IRQ Map updated 81

DMA Channel MAP updated 82

Clarification on the use of the RSTSW# I/O Pin (Manual Reset Switch) Added 64

,24

REVISION MT002614 2001/03/15

Release Version for PC/II+p v2.04

Additions and Corrections to this manual include the following:

Added Power Connector description and pinout 59

Added Fan Connector description and pinout 41

Added Connector Pinout index 33

Hyperlinks added for all connector reference IDs (eg. J907 jumps to definitions for J907) Various

PC/104 speed default setting changed to 8.25 MHz 54

Preface added 11

REVISION MT002615 2001/03/20

Release Version for PC/II+p v2.04

Documentation changes include the following:

Enable/Disabling port 92h description 54

PC/104 SYSCLK (ISA) Clock Speed Values 54

Watchdog 76-77

NMI Register aliases 70h,72h and 71h,73h 78

USB is Memory mapped by Windows Drivers; I/O map entries removed 78

PCI Configuration registers (Address & Data DWORDs) in I/O space added 78

USB IRQ 11 Mapping added 81