Specifications

PC/II+p Board Technical Reference Manual 91

11.3.3 Option c – Panel ENAVEE Polarity

0 ENAVEE is UNUSED

Select is video will not be ordered, or the panel interface will not be used.

The ENAVEE signal is used to control power sequencing on some types of panels.

1 ENAVEE is ACTIVE HIGH

2 ENAVEE is ACTIVE LOW

11.3.4 Option E – Ethernet

0 NONE

1 10Base-T, with filter & transformer, pulled to the Ethernet Header

2 AUI, with filter & transformer, pulled to the Ethernet Header

3 10Base-T and AUI, with filters & transformers, pulled to the Ethernet Header

11.3.5 Option H – Flash Disk

0 NONE

1 Flash Disk Socket, 32-pin DIP, suitable for M-Systems Disk-on-Chip®

11.3.6 Option K – Real-Time Clock & Battery

0 NONE

1 Real-Time Clock with Battery Backup is installed

NOTES. The Real Time Clock’s RAM holds BIOS system configuration data; when not installed, the

configuration data is hard-coded into the BIOS for the user. Contact Megatel Engineering for details on how

to order hard-coded BIOS configuration.

11.3.7 Option M – Memory, SDRAM

1 32 MB Soldered SDRAM

2 64 MB Soldered SDRAM

11.3.8 Option P – Processor

0 Socket Only (for user-populated Socket 7 compatible processor)

1 AMD K6-2E/233AMZ Processor, 233 MHz

2 INTEL FV80503CSM66166, 166 MHz

3 INTEL FV80503CSM66266, 266 MHz

NOTES. The Supported processors and Order Codes in this table are SUBJECT TO CHANGE.

Contact Megatel before ordering.