User Manual

22
English
Management
Note: Functions vary depending on model definition.
Lamp Mode Normal: normal power consumption mode
Eco: dim the projector lamp which will lower power consumption
Dynamic: automatically optimize the display of dark ovie scenes
enabling them to be shown in incredible detail.
High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Auto Shutdown
(Minutes)
The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 15 minutes)
Menu Display Time
(Seconds)
Choose the OSD menu display time. (Default is 15 seconds). Select “
” to turn off main menu/one direct-key menu manually by user.
Auto Power On AC Power On
Choose "On" to power on projector while AC power plug in.
HDMI Power On
Choose "On" to power on projector while HDMI power plug in.
VGA Power On
Choose "On" to power on projector while VGA power plug in.
Power Mode (Standby)
• Active: enable support power on the projector via Smart
source.
• Eco: disable support power on the projector via Smart source.
Lamp Information Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Choose "Yes" and press "ENTER"to turn the lamp hour counter to
0 hours.
Language
Choose the multilingual OSD menu. Use the key to select
your preferred menu language.
• Press "ENTER" to confirm the selection.