Operation Manual

English

Turning the Projector On/Off

Turning On the Projector

1 Press OPEN on the control panel to release the mirror door.

2 Ensure that the power cord and signal cable are securely connected.

The Power LED will light red.

3 Turn on the projector by pressing (POWER) on the control panel or

remote control, and the Power indicator LED will turn blue.

4 Turn on your source (computer, notebook, video player, etc.). The

projector will detect your source automatically.

• If the screen displays "No Signal", please make sure the signal cables

are securely connected.

• If you connect to multiple sources at the same time, use "SOURCE" on

the control panel or remote control, or the direct source key on the

remote control to switch between inputs.

Note: When the mirror door is closed for over 5 seconds, the

projector will shut down and cool down for 120 seconds, then

enter to a stanby mode.

2 3